The belt is still attached to the alternator, however, it looks like one of the pulley's broke off, thus causeing the loose belt. When I asked Kragen Auto Parts, they had NO idea what the problem was. HELP!
Well, it sounds like you need a new pully. In the old, days the alternator had it's own belt. But now everything runs off the serpintine belt. I am going to assume that you have this set up. There is a tension pully and the main drive pully. Normally
How to change the AC/alternator belt in your 4th gen Maxima. As said, this applies to 5th ('00-'01), 5.5 ('02-'03), and likely 6th ...
So here is a checklist for a loose or noisy fan belt. If noisy make sure: The belt is not too old/worn There are no seized or hard to turn pulleys ...
Another job I performed on the white F-150. This video received the following awards: #38 - Most Discussed (Today) - Autos & Vehicles #91 ...
How tight or loose should alternator belt be? - Car Forums ...
How tight or loose should alternator belt be? discussion in the car forums by Edmunds.com
R1200GS Alternator Belt Change
If the belt fails while you're riding it, mostly likely all that will happen is that you'll loose alternator output and soon thereafter run out of electrons. ...
Belts
Once loose enough, push the tensioning bolt up and over the lip. ... Place the alternator belt on the alternator and then the crank pulley. Place the ...
Loose Alternator Belt on 1970's Models | MercedesSource.com
Loose Alternator Belt on 1970's Models. Mercedes used a unique and clever way to adjust alternator belt tension during most of the mid to late 1970's. ...
How tight or loose should alternator belt be? - Car Forums ...
so alternator bearings only go bad when someone puts a belt on too tight? my g/f car ... How tight or loose should alternator belt be? - READ ONLY. 11 messages, Last post on Jan ...